TRANSPONDERY.COM
☛ To program the remote control transmitter for this vehicle, requires a working ignition key.
1. Get into the car and close all doors.
2. Using the car key, switch ON the ignition briefly and switch OFF again. The switching time must remain under 5 seconds.
3. Remove the key from the ignition lock.
4. Press and hold the LOCK button in the remote control.
5. STILL PRESSING the LOCK button - press the UNLOCK button 3 times.
6. Release the LOCK button.
When done properly, the Central Locking system should automatically lock and then unlock.
Repeat procedurę from step 4 for learning additional Remote Control Transmitters.
