SEAT AROSA
REMOTE TRANSMITTER PROGRAMMING INSTRUCTION

☛ To program the remote control transmitter for this vehicle, requires a working ignition key.

Step-by-Step procedure:

1. Get into the car and close all doors.

2. Using the car key, switch ON the ignition briefly and switch OFF again. The switching time must remain under 5 seconds.

3. Remove the key from the ignition lock.

4. Press and hold the UNLOCK button at the Remote Control Transmitter.

5. STILL PRESSING the UNLOCK button - press the LOCK button 3 times.

6. Release the UNLOCK button.

When done properly, the Central Locking system should automatically lock and then unlock.

Repeat procedurę from step 4 for learning additional Remote Control Transmitters.