TRANSPONDERY.COM
TRANSPONDERY.COM
TRANSPONDERY.COM
TRANSPONDERY.COM
TRANSPONDERY.COM
TRANSPONDERY.COM
TRANSPONDERY.COM
TRANSPONDERY.COM

SEAT ALHAMBRA
REMOTE TRANSMITTER PROGRAMMING INSTRUCTION

Remote Control Transmitter learning procedure for Seat Alhambra 1999-2003 model years.
No tools required.

To program the remote control transmitter for this vehicle, requires two keys.

I recommend disconnecting Remote Controls from the Key while programming (it is easy and will simplify programming for you)

Step-by-Step guide:

1. Get into the car, close all doors and Open and Close the both front windows using Window Switch on Driver Door Panel.

2. One of the key insert to Ignition Switch and turn the ignition ON. Leave the key in this position.

3. Get out of the car, close the door and insert second key into Driver Door Lock.

4. Using the second key, turn the Driver Door Lock from Neutral to Open position 3 times (key must be held in open position by 1 sec).

When done properly, the driver door LED should illuminate. For next steps you have 20 seconds:

5. Remove the key from Driver Door Lock.

6. Press and hold the Lock Button at your Remote Control Transmitter. Still pressing the Lock Button - press the Unlock Button 3 times.

7. Release the Lock Button.

8. Open the door using the key manually (not via remote control).

The driver door LED should flash to indicate successful programming.

Repeat procedurę from step 6 for learning additional remotes (up to a maximum of four).

Seat Alhambra - Remote Key programming manual (7M3959753F)
Additional notes
PN of remote control transmitters: 7M3959753F (and compatible replacements).