FORD EXPLORER KEYLESS ENTRY - KEY FOB - PROGRAMMING INSTRUCTION

REMOTE KEY FOB - KEYLESS ENTRY PROGRAMMING INSTRUCTION FOR FORD EXPLORER PRODUCED TO 2001 :


1. Using the car key switch the “ignition off” and switch the “ignition on” 8 times within 10 seconds.
    You must end this procedure with key in “ignition ON” position. 
    The locks will lock and unlock fast about 3 times. This means the system is in learn mode.

2. Within 20 seconds press the lock button on all of the remotes you want to program to that vehicle.
    Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote.
    Door locks will cycle again to confirm programming

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

______________________________________________________________________________


REMOTE KEY FOB - KEYLESS ENTRY PROGRAMMING INSTRUCTION FOR FORD EXPLORER PRODUCED FROM 2002 :

1. Close all doors.
2. Open drivers door and press the UNLOCK button on drivers door panel while door is open.
3. Insert key in ignition and turn ignition to ON.

4. Using the car key switch the “ignition off” and switch the “ignition on” 8 times within 10 seconds.
    You must end this procedure with key in “ignition ON” position. 
    The locks will lock and unlock fast about 3 times. This means the system is in learn mode.

5. Within 20 seconds press the lock button on all of the remotes you want to program to that car.
    Door locks will cycle to confirm programming.

6. Within 20 seconds, press any button on second keyless remote. 
    Door locks will cycle again to confirm programming

7. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

______________________________________________________________________________


REMOTE TRANSMITTER FOR FORD EXPLORER PART NUMBER : F87B-15K601-AA and others.

FORD EXPLORER CAR - KEYLESS ENTRY REMOTE PROGRAMMING CODING PROCEDURE