REMOTE KEY FOB PROGRAMMING INSTRUCTIONS - PROCEDURES FOR FORD GALAXY

   
     REMOTE KEY FOB PROGRAMMING INSTRUCTION - SEQUENCE FOR FORD GALAXY 

     PRODUCED FROM 1995 TO JULY 1997 WITH INFRARED REMOTE CONTROL :

     Ensure all doors and windows on the vehicle are shut.

     1. Insert key into driver’s door lock.
     2. Turn the key to the unlock position 3 times ( key must be held in open position by 0.5 seconds )
     3. Remove the key.

     The driver’s door LED will illuminate. Within 20 seconds:

     4. Point the key at the receiver located near the rear view mirror.
     5. Press and hold the lock button.
     6. Still pressing the lock button - press the unlock button 3 times.
     7. Release the lock button.

     The driver’s door LED should flash to indicate correct programming.
     Repeat 4 to 7 for additional remotes up to a maximum of four.
     Wait 15 seconds before trying remote.

     ______________________________________________________________________________
    

     REMOTE KEY FOB PROGRAMMING INSTRUCTION - SEQUENCE FOR FORD GALAXY  

     PRODUCED FROM 1997 TO 1999 ( REMOTE CONTROL 5WK4 790/97/98 and others ) :

     Ensure all doors and windows on the vehicle are shut.

     1. Insert key into driver’s door lock.
     2. Turn the key to the unlock position 3 times and keep the key in the lock opening position for 5 sec.
     3. Remove the key.

     The driver’s door LED will illuminate. Within 20 seconds:

     4. Press and hold the lock button.
     5. Still pressing the lock button - press the unlock button 3 times.
     6. Release the lock button.

     The driver’s door LED should flash to indicate correct programming.
     Repeat 4 to 7 for additional remotes up to a maximum of four.
     Wait 15 seconds before trying remote.

     _____________________________________________________________________________

     REMOTE KEY FOB PROGRAMMING PROCEDURE - INSTRUCTION FOR FORD GALAXY  

     PRODUCED FROM 1999 TO 2002 ( 7M3959753,  7M3 959 753 and compatible ) :

     1. Open and close the both front windows.
     2. One of the key switch on the ignition and leave the key in this position.
     3. Get out of the car, close the door and i
nsert second key into driver’s door lock.
     4. Turn the key to the unlock position 3 times ( key must be held in open position by 1 seconds ).
     5. Remove the key.

     The driver’s door LED will illuminate. Within 20 seconds:

     6. Press and hold the lock button.
     7. Still pressing the lock button - press the unlock button 3 times.
     8. Release the lock button.
     9. Open the door with the key manually ( not via remote control )

     The driver’s door LED should flash to indicate correct programming.
     Repeat 4 to 7 for additional remotes up to a maximum of four.

     _____________________________________________________________________________
    


ΟΔΗΓΙΕΣ ΓΙΑ ΕΛΕΓΧΟΥΣ προγραμματισμό τηλεχειριστήριό vw sharan

INFRARED REMOTE CONTROL

FORD GALAXY 1995-1997

5FA007680 INSTRUCCIONES PARA EL CONTROL REMOTO DE PROGRAMACIÓN

RADIO REMOTE CONTROL
FORD GALAXY 1997-1999
( 5WK4 790/97/98  and compatible )

INSTRUCTIES VOOR DE PROGRAMMERING AFSTANDSBEDIENINGEN

RADIO REMOTE CONTROL
FORD GALAXY 1999-2002
( 7M3959753 and compatible )

   Programming the remote control key fob in Ford Galaxy produced after 2002 it may be impossible without the use
   of diagnostic equipment : VCDS, VAG Commander, VAS50xx and many others. After 2006 - you have to use Ford VCM IDS.

ford dealer car money - galaxy remote instruction procedure