TRANSPONDERY.COM
TRANSPONDERY.COM
TRANSPONDERY.COM
TRANSPONDERY.COM
TRANSPONDERY.COM
TRANSPONDERY.COM
TRANSPONDERY.COM
TRANSPONDERY.COM

FORD GALAXY
REMOTE TRANSMITTER PROGRAMMING INSTRUCTION

Remote Control Transmitter programming manual for Ford Galaxy 1995-1997 with Infrared Receiver.
No tools required.

You must close all doors, liftgate/trunk and windows in order for this programming procedure to work.

This procedure is for the remote keyless entry only and has nothing to do with the ability to start the engine.

Step-by-Step procedure

1. Insert the key into driver’s door lock.

2. Turn the key from Neutral to the Unlock position 3 times (key must be held in open position about 0.5 seconds).

3. Remove the key from driver’s door lock.

When done properly, the driver’s door LED should illuminate. For next steps you have 20 seconds:

4. Point the key at the receiver located near the rear view mirror.

5. Press and hold the lock button.

6. Still pressing the lock button - press the unlock button 3 times.

7. Release the lock button.

The driver’s door LED should flash to indicate successful programming.

Repeat procedurę from step 4 for learning additional remotes (up to a maximum of four).

Wait 15 seconds before trying remotes. 

Ford Galaxy - Infrared Remote Control Transmitter - Programming Instruction