REMOTE KEY FOB PROGRAMMING INSTRUCTIONS - PROCEDURES FOR FORD WINDSTAR

THESE ARE THE STEPS YOU NEED TO FOLLOW IN ORDER TO PROGRAM REMOTE KEY FOB 

( KEYLESS ENTRY TRANSMITTER ) IN FORD WINDSTAR. NO TOOLS REQUIRED. 

______________________________________________________________________________


1. Using the car key switch the “ignition on” and switch the “ignition off” 8 times* within 10 seconds.
    You must end this procedure with key in “ignition on” position. 
    The locks will lock and unlock fast about 3 times. This means the system is in learn mode.

2. Within 20 seconds press the lock button on all of the remotes you want to program to that vehicle.
    Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote.
    Door locks will cycle again to confirm programming

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

* Depending on the model year, activation “remote learning mode”, described in first point, can differ 
  in the amount of turning off/on the ignition ( instead of 8 may be, for example, 5 times ).
  Activation “remote learning mode” in vehicle will be indicated by central locking - the locks will lock
  and unlock fast about 3 times ).

______________________________________________________________________________


REMOTE TRANSMITTER FOR FORD WINDSTAR PART NUMBER :
1788A-FWB1U345 8L3Z15K601B 8L-3Z-15K-601B CWTWB1U212 CWTWB1U331 GQ43VT11T

______________________________________________________________________________

 
ford windstar money programming instructions procedures
DEALER windstars fords transmitters remotes programming procedures instruction

REMOTE PROGRAMMING GUIDE FORD. DEALER PRICE CAR