FORD ECONOLINE - remote keyless entry - key fob - remote transmitter programming instruction

THESE ARE THE STEPS YOU NEED TO FOLLOW IN ORDER TO PROGRAM REMOTE KEY FOB 

( KEYLESS ENTRY TRANSMITTER ) IN FORD ECONOLINE. NO TOOLS REQUIRED. 

______________________________________________________________________________


1. Using the car key switch the “ignition on” and switch the “ignition off” 8 times* within 10 seconds.
    You must end this procedure with key in “ignition on” position. 
    The locks will lock and unlock fast about 3 times. This means the system is in learn mode.

2. Within 20 seconds press the lock button on all of the remotes you want to program to that vehicle.
    Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote.
    Door locks will cycle again to confirm programming

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

* Depending on the model year, activation “remote learning mode”, described in first point, can differ 
  in the amount of turning off/on the ignition ( instead of 8 may be, for example, 5 times ).
  Activation “remote learning mode” in vehicle will be indicated by central locking - the locks will lock
  and unlock fast about 3 times ).

______________________________________________________________________________


REMOTE TRANSMITTER FOR FORD ECONOLINE PART NUMBER :
GQ43VT4T TRW 3165189 F6UZ15K601AB, F6UZ-15K601-AB 1470K763, DO1470 K763 1470-K763

______________________________________________________________________________

 
GQ43VT4T TRW 3165189 F6UZ15K601AB, F6UZ-15K601-AB 1470K763, DO1470 K763 1470-K763 ford econoline instruction
guide DEALER instruction programming transmitter remote ford econoline

FORD ECOLINE - DEALER - MONEY - FOREX - GUIDE