MERCURY TRACER - REMOTE KEY FOB PROGRAMMING PROCEDURE

THESE ARE THE STEPS YOU NEED TO FOLLOW IN ORDER TO PROGRAM REMOTE KEY FOB 

( KEYLESS ENTRY TRANSMITTER ) IN MERCURY TRACER. NO TOOLS REQUIRED. 

______________________________________________________________________________


1. Using the car key switch the “ignition on” and switch the “ignition off” 8 times* within 10 seconds.
    You must end this procedure with key in “ignition on” position. 
    The locks will lock and unlock fast about 3 times. This means the system is in learn mode.

2. Within 20 seconds press the lock button on all of the remotes you want to program to that vehicle.
    Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second remote transmitter - key fob.
    Door locks will cycle again to confirm programming

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

* Depending on the model year, activation “remote learning mode”, described in first point, can differ 
  in the amount of turning off/on the ignition ( instead of 8 may be, for example, 5 times ).
  Activation “remote learning mode” in vehicle will be indicated by central locking - the locks will lock
  and unlock fast about 3 times ).

______________________________________________________________________________


REMOTE TRANSMITTER FOR MERCURY TRACER PART NUMBER :
GQ43VT4T F87B-15K601-BB F8DB-15K601-BA 2S4T-15K601-AA
F87B-15K601-BB F8DB-15K601-BA 2S4T-15K601-AA 8L3T-15K601-AB 8S4T-15K601-AB

______________________________________________________________________________

 
MERCURY TRACER - REMOTE KEY FOB - TRANSMITTER PROGRAMMING INSTRUCTIONS
REMOTE TRANSMITTER FOR MERCURY TRACER
PROGRAM REMOTE KEY FOB IN MERCURY TRACER