Please enable / Bitte aktiviere JavaScript!
Veuillez activer / Por favor activa el Javascript!

     MERCURY SABLE - REMOTE KEYLESS ENTRY PROGRAMMING INSTRUCTION

THESE ARE THE STEPS YOU NEED TO FOLLOW IN ORDER TO PROGRAM REMOTE KEY FOB 

( KEYLESS ENTRY TRANSMITTER ) IN MERCURY SABLE. NO TOOLS REQUIRED. 

______________________________________________________________________________


1. Using the car key switch the “ignition on” and switch the “ignition off” 8 times* within 10 seconds.
    You must end this procedure with key in “ignition on” position. 
    The locks will lock and unlock fast about 3 times. This means the system is in learn mode.

2. Within 20 seconds press the lock button on all of the remotes you want to program to that vehicle.
    Door locks will cycle to confirm programming.

3. Within 20 seconds, press any button on second keyless remote.
    Door locks will cycle again to confirm programming

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

* Depending on the model year, activation “remote learning mode”, described in first point, can differ 
  in the amount of turning off/on the ignition ( instead of 8 may be, for example, 5 times ).
  Activation “remote learning mode” in vehicle will be indicated by central locking - the locks will lock
  and unlock fast about 3 times ).

______________________________________________________________________________


REMOTE TRANSMITTER - KEY FOB FOR MERCURY SABLE P/N :
8L3T-15K601-AB 4B:8S4T-15K601-AB
CWTWB1U331, CWTWBIU331, CWTWB1U345, CWTWBIU345

______________________________________________________________________________

 
REMOTE TRANSMITTER MERCURY SABLE CWTWB1U331
MERCURY SABLE - REMOTE KEYLESS ENTRY PROGRAMMING INSTRUCTION

stock exchange; wall street; forex; money; nasdaq